New control lock for Y-stick Foxbat

A22 control lock 01

A22 stick control lock – click photo for larger view

Foxbat Australia has been working with a professional aviation control-lock company to develop a new system for locking the single handle and Y-stick control version of the aircraft. The result is a secure method of locking the flaperon/elevator control stick, suitable for use when the aircraft is parked outside – overnight or longer. This system is not suitable for twin control yoke A22 aircraft.

You may recall that as well as instructions in the A22 Pilot Operating handbook (POH) a recent factory mandatory service bulletin advises that when a stick-control aircraft is parked outside, the metal lock-pin must be supplemented with control surface clamps to ensure there is no damage to the elevator rod-end connection due to wind gusts. However, while it is relatively easy to clamp the flaperons at the wing tips, clamping the elevator has proved more difficult.

Without access to suitable surface clamps, a number of owners have preferred to remove the lock-pin and instead use the seat belts to lock the controls when the aircraft is parked outside. Nevertheless, the inconvenience of continually adjusting the seat belts, after they have been used to lock the controls, may cause some pilots/owners not to lock the controls properly. Also, some owners do not like the elevator ‘up’ position which results from locking the controls with the seat belts.

Worse yet, some owners still rely on the lock-pin even in adverse conditions – risking potentially disastrous damage to the elevator rod-end connection.

A22 control lock 03

A22 stick control lock kit – click photo for larger view

The new control/gust lock system is an excellent solution to ensuring that your A22 can be parked safely outside in all normal wind conditions, without the need to use either the metal lock-pin, seat belts or surface clamps. It holds the flaperons in a neutral position with the elevator ‘down’.

The new lock consists of a red adjustable looped strap, which fits and tightens over the stick. This loop is attached to two forward extending straps which are positively anchored via ‘pin-and-eye’ fixtures (not press-studs) on each side of the centre tunnel. The eyes on the strap ends are quickly pushed into their locked position and are released by pulling down on the strap end. The loop round the stick is adjustable and is also easily tightened and released. Each part of the strap system is labelled ‘Remove before flight’ and can be easily attached and removed from left or right seats.

Installation is very simple, requiring only the drilling of an additional hole each side to accommodate the anchoring pin bolts – which also utilise an existing hole.

Now, here’s the good news: during the introductory period until the end of April 2016, the price will be A$55 including 10% GST. After the introductory period, the price will be A$75 including GST. This price includes everything you need to fit the system and full installation instructions. Postage will be charged at cost.

If you want one of these control locks, please email info@foxbat.com.au with your name and address to confirm your order. You can pay directly with PayPal or with your credit card via Paypal – we’ll send you instructions.

 

1 thought on “New control lock for Y-stick Foxbat

Leave a Reply to bennyboy320 Cancel reply

Your email address will not be published. Required fields are marked *